|
Model |
KL-300T |
|
Applicable fibers |
G.657A1/A2, SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
|
Fiber cleaved length |
8 ~16mm （Coating diameter：250µm） |
|
Fiber diameter |
Cladding diameter：80 ~150µm , Coating diameter：100 ~1000μm |
|
Fiber Count |
Single |
|
Auto focusing |
Available |
|
Fiber aligning method |
Core aligning， clad aligning， manual aligning |
|
Average splice loss |
0.02dB （SM）, 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) |
|
Splicing time |
Typical 9 sec，with standard SM fiber |
|
Splicing program |
53(temple), 40(user) |
|
Storage of splice result |
4000 results，20 parameter per result |
|
Fiber image magnification |
300X （X or Y view）,150X （X and Y view） |
|
Heating time |
Typical 30 sec |
|
Heating program |
9(Templet), 24(user) |
|
Heating temperature adjust |
Available |
|
Applicable sleeves |
60mm, 40mm and a series of micro sleeves |
|
Tension test |
2N |
|
Electrode life |
2500 |
|
Battery capacity |
Typical 160 cycles （splice and heat） |
|
Monitor |
5.7 inch TFT color monitor |
|
Terminal |
USB 1.1 and VGA , software upgrade via USB interface |
|
Operating condition |
0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s |
|
Power supply |
AC 100-240V with AC adapter; inner Li-battery(8000mAH) |
|
Dimension |
150mm(L)×150mm (W)×150mm (H) |
|
Weight |
2.7 Kg excluding battery, 3.2 Kg including battery |
